|
Citizen Eco-Drive Promaster Diver's 200m watch JV0000-01E
Model : JV0000-01E
Descriptions:
Eco-Drive (Solar-Powered)
Promaster Citizen
200m Diver's Watch
Black Wave Rubber Strap (Tough)
Stainless steel case Back
Dark grey Dial with Black Rim
Orange Coloured Hands (luminous)
Markers and Numerals on dial (Luminous)
Numerals on Black Rim (White and Luminous)
Square shaped Digital Display at 3 o' clock position (EL Light)
Silver Bezel with 4 Push Buttons (Fixed)
Specifications:
Water Sensor (Automatically switches the watch to the DIVING mode when Water is detected)
Pressure Sensor
Timekeeping Accuracy: ±15 seconds per month on average
Depth Measurement Accuracy:
- 0m to 100m: Within ±(1% of displayed value + 0.3 m) (when used at a constant temperature)
- 0 ft to 300 ft: Within ±(1% of displayed value + 1 ft) (when used at a constant temperature)
- Guaranteed accuracy temperature range: 0°C to 40°C (water depth range: 0m to 100m) 32°F to 104°F (water depth range: 0 ft to 300 ft)
* The accuracy of water depth measurement is affected by changes in ambient temperature
- Working altitude range: 300m to 3000m / 1000 ft to 10000 ft (above sea level)
Water Depth Measurement Range
1m to 100m / 0ft to 300ft
Watch Operating temperature range: 0°C to 55°C (32°F to 131°F)
Water Temperature Measurement Accuracy
Displayed value ±2°C / ±4°F
Water Temperature Measurement Range
-9.9°C to 40°C / 14°F to 104°F
Modes and Display Functions:
Standard Mode
Time
Analog: Hour hand, minute hand, second hand, function hand (charge level / depth measurement)
Digital: City name, month, date, day, year (during correction only), daylight savings time
- Surface time measurement (measurement and display of time on surface following completion of a valid dive)
Hours, minutes (up to 24 hours), previous dive time, previous maximum depth
- Travel time
Analog: Time in the time/date mode
Digital: City name, hours, minutes, month, date, daylight savings time
- Alarm 1 / Alarm 2 / Alarm 3
Analog: Alarm time (hours, minutes)
Digital: City name, hours, minutes, on/off setting, daylight savings time
Alarm monitor
- Diving mode
Dive alarm setting
Depth alarm (dive alarm tone sounds, LED lights)
Setting range: 5m to 99m / 5ft to 295ft
Setting units: 1m / 5ft
ON/OFF switching
- Diving log recall
No. of diving logs capable of being recalled: most recent 20 logs
Log contents: Log number (01-99, 00) dive date, time zone, daylight savings time, dive starting time, maximum depth, minimum water temperature, dive time
Continuous operating times:
- Approx 6 months (without Power Save) to 2.5 years
(with Power Save 2 activated) from fully charged to stopped without recharging
- Approx 2 days from 2-second interval movement to stopped
Alarm Functions:
- Abnormal Depth Display
- Dive Time Alarm
- Digital Display Error
- Water Sensor Error
- Pressure Sensor Error
- Measurement Error (0m / 0ft detection)
- Diving log Memory Error
- Abnormal depth alarm
- Depth measurement out of range error
- Ascent rate alarm
Additional functions:
- Charge level indicator function
- Insufficient charge warning function
- Power save 1
- Power save 2
- Overcharge Prevention Function
Approximate measurements:
Case Diameter:51mm
Case Thickness:14.5mm
Shipped With INTERNATIONAL WARRANTY
|
Home
